Skip to product information
1 of 4

AMMO REFLEX PRO ENAMEL COAT

AMMO REFLEX PRO ENAMEL COAT

Ceramic Paint Protection Coating

Regular price $115.00
Regular price Sale price $115.00
Sale Sold out
Shipping calculated at checkout.

The safest ceramic coating you can get for you and your ride.

AMMO REFLEX PRO ENAMEL COAT is a ceramic coating that is non-flammable, safe, easy to use, and lasts 1 to 2 years if maintained properly. It also looks unbelievably, insanely, ridiculously, shiny. AMMO REFLEX PRO ENAMEL COAT is easy to apply, (no heat lamps or special tools needed), and unlike other ceramic coatings, maintains your paint’s flexibility. We’ve also added some anti-bacterial properties (hey, we touch our cars a lot). This product formulation has been tested to ISO 22196:2011 showing levels of E coli to be reduced by up to 99.99% (Log 4) over a 24-hour period and levels of Staph Aureus to be reduced by up to 99.99% (Log 3) over a 24-hour period.

  • Strong, flexible, paint & trim coating
  • Makes future cleaning easier
  • Up to 2 years ceramic protection
  • Incredible water beading properties
  • Proven anti-bacterial ingredients
  • Perfect for the fleet! Multiple coats per bottle

 

View full details

How do I use AMMO REFLEX PRO ENAMEL COAT

1. Wear latex gloves, eye protection, mask, and work in a well-ventilated area.

2. Prior to first coat application, wash and clay the paint if needed.

3. If needed, use isopropyl alcohol mixed 50-50 with water or an automotive grade wax and silicone remover to decontaminate surface.

4. Prime microfiber applicator and apply in overlapping motions in 2x2 sections.

5. Allow 2-3 minutes dwell time until cured (wait for the rainbow to appear).

6. After rainbow appears or 2 minutes dwell time (whichever occurs first), Lightly remove excess with a microfiber towel.

NOTE: Best if applied on cool surfaces, out of direct wind, and no water/rain for 6 hours after application. Dependent on conditions and thickness of application, may take a week to fully set.

AMMO REFLEX PRO ENAMEL COAT FAQ

Q: Is Reflex Pro a Ceramic Coating?

A: Yes. Coatings vary drastically, but this has a very high percentage (once cured) of SiO2 with carbon residues. This product contains, polysilazanes, solvents, and additives which are thermo-setting resins at room temperature. (ie do not require a UV light)

Q: How do I maintain Reflex Pro?

A: Maintenance is exactly the same as a non coated car, however, abrasives will remove the coating. In other words, perform a healthy wash (when needed) with AMMO Foam or favorite car soap, dry with Hydrate, and use Reflex Pro Top Coat as often as you feel is required. The more layers of protection (Skin, Reflex Pro Top Coat, Blush, etc...) the more protected the "base layer" of Reflex Pro will be.

Q: How long does Reflex Pro take to cure?

A: Depends on humidity and ambient temps, but 30 secs to 2 minutes is the average flash time before buffing off. One layer is advised for application and minimum curing time of 6 hours in a dry environment. Reflex Pro may take up to a week to fully set and will perform optimally after 1st wash.

Q: How do I prep the paint before applying Reflex Pro?

A: Wash the paint, remove the contaminants with clay (if necessary), compound and polishing (if necessary) is always the best option as the Reflex will have extra depth and shine over "leveled" paint. Light ISO wipes (spray on towel first) can be helpful if paint was recently waxed. You can layer Reflex Pro over "old" layers of Reflex Pro without removing the old layer.

Q: Can I use other paint care products (wax, sealant, spray wax) after Reflex Pro is applied?

A: Yes. However, the top layer (most upper surface) will give the paint its water characteristics. Hydrophobic or Hydrophilic. I prefer to layer AMMO SKIN over it every few months as its "jacket" or sacrificial layer. I also use Reflex Pro Top Coat after every wash.

Q: Is Reflex Pro safe on matte paint or vinyl wraps?

A: Yes. It will bring more depth or "richness" to the color but it will not be "shiny" afterwards. I highly recommend it on matte paint or vinyl as it is really the only type of protection for those areas without causing a deep shine (therefore defeating the matte finish).

"The drive is sweeter knowing your ride is protected."

Customer Reviews

Based on 94 reviews
98%
(92)
2%
(2)
0%
(0)
0%
(0)
0%
(0)
A
Alan Wallace
Ammo Reflex Pro

I have found it to be more and more my “ go to”coating. I like that its formula plays well with its branded maintenance products, my customers love it. I use very safe washing methods and after decontaminating hard water off the vehicles I work on every year to 18 months , it can layered. ( Maui water is very hard) That’s game changing as the older application will not have to be removed unless I have to correct the paint. Easy to apply .

F
Frank Petrie
Great shine and protection

I've been using Reflex Pro for years on all our family cars. Relex Pro gives our cars fantastic shine and makes paint maintenance easy. Dirt, bugs and grime doesn't stick to the paint and makes washing much easier and quicker.

S
Scott Krupa
I feel kinda bad

I finished putting this product on my car and i watched a fly land on the hood. His little legs slid out from underneath him and he smashed his head into the car. Sorry, little bug. This stuff really really works.

E
Eric Osipov
Love this coating!

I first tried this coating last year, it was actually the first coating I ever used. Since then I’ve gone through 3 bottles of it and have also tried other company’s coatings. I keep coming back to this one. This is a special product, you can tell Larry didn’t just get a private label coating and slap his name on it. He really must have poured a lot of time into finding the perfect formula for user experience and end result. Also, I really like how much fudge factor you have if you maybe don’t level a spot properly you can fix it if you catch it within a reasonable time frame. Most of all let’s not forget your car will look amazing!!